UNI MARBLE INC

Our quality policy is to provide product on time at the best total value.

For over twenty five years, Uni Marble Inc. offers highest quality natural stone and quartz fabrication and installation. We are always looking to exceed customer's expectations. We are servicing entire Bay Area.

All Uni Marble Inc. work is done in accordance with ASTM standards: C615, C568 & C503  and we take responsibility for all necessary repairs to our craftsmanship during first year free of charge.

Not all stones are alike. Different minerals polish out differently. Some minerals will not shine as much as the quartz and feldspar. Some stones have minute fissures in between the various granules, which is normal and will not trap liquids or food particles. When stone is purchased within the same lot or bundle, variations in color and veining should be expected and considered. As quarrying continues, materials from different sections of the quarry or from different depths of the quarry can vary greatly. In certain cases, quarries have run out of certain shades or the veining has changes so drastic that current lots no longer match previous lots. For these reasons, it is important to purchase sufficient quantities at the same time. Being a natural stone, variations from shipment to shipment or lot to lot cannot be controlled or predicted.

Uni Marble Inc. recommends using sealer once every six months on all stone surfaces to maintain high quality of stone. Before applying sealer to the surface make sure the surface is dry and clean of loose debris. Liberally apply 1-3 coats. Highly porous material will need longer cure times between coats. Allow sealer to saturate, about 5-15 minutes per coat. Wipe off any excess residue prior to complete drying. Allow a minimum fo 1-hour drying time between coats. Full cure is acheived in 24 hours. A good stone soap or stone polish should be used for on going maintenance. Do not use abrasive cleansers or harsh ammonia based cleaners. Always check manufacturing instruction before use.

Installation

Always on time